View U5300A-102_9001439.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

keysight m9203a pxie high-speed digitizer/ wideband digital receiver 2 channels, 12-bit, up to 3.2 gs/s, dc to 2 ghz bandwidth data sheet
02 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet overview introduction the keysight m9203a is a very fast and low noise pxie high- speed digitizer/wideband digital receiver featuring wide analog bandwidth, making it ideal for wireless, radar and satellite commu - nication applications or any application requiring wideband signal capture, and at the same time very high dynamic range. thanks to its pci express ? backplane connection, the m9203a supports continuous data streaming to disk. product description the m9203a is a dual-slot 3u pxie 12-bit high-speed digitizer/ wideband digital receiver running at 3.2 gs/s, with up to 2 ghz instantaneous analog bandwidth and providing a large 4 gb ddr3 acquisition memory. the m9203a features a large xilinx virtex-6 fpga that can implement different functionalities depending on which frmware option you choose. the m9203a pxie high-speed digitizer/wideband digital receiver can also be combined with the keysight 89600 vsa software for advanced dual-channel signal analysis. for information on other frmware options please contact keysight technologies: digitizers@keysight.com example applications C wireless communication (5g, lte) C emerging communication standards (e.g. docsis 3.1) C radar and wideband signal capture C radar and satellite communication applications C semiconductor automated test product features C 1 channel with 12-bit resolution up to 3.2 gs/s sampling rate with interleaving enabled C 2 channels up to 1.6 gs/s simultaneous sampling rate C dc up to 2 ghz bandwidth C 50 ? input impedance, dc coupled C selectable 1 v or 2 v full scale range (fsr) C 200 fs channel-to-channel skew stability C 15 ps rms trigger time interpolator (tti) precision C up to 4 gb ddr3 on-board memory C enhanced real-time processing using xilinx virtex-6 fpga C support for loading custom real-time processing C high data throughput pcie ? gen2 (x8) backplane C real-time digital down-conversion (-ddc) with adjustable center frequency and analysis bandwidth C real-time digitizer raw data streaming and recording bundle C real-time digital down-conversion with i/q data streaming (-cb0) and recording bundle (-cb2) uncompromising values C fast pxie 12-bit wideband digitizer with on-board real-time processing C capture wide bandwidth signals C high dynamic range acquisition for better measurement fdelity C accurate long term measurement C capable of switching between multiple frmware programs C self-trigger mode for unequaled synchronous noise reduction C open fpga for custom process C reduced test time by tuning and zooming on signals (-ddc) C up to 1 ghz baseband streaming and recording (-cb0) C dual channel phase coherent streaming and recording with up to 320 mhz alias protected ibw (-cb2)
03 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet hardware platform product overview the m9203a is pxi express compliant. designed to beneft from fast data interfaces, the product can be integrated in pxie and pxi hybrid chassis slots. the pxi format offers high performance in a small, rugged package. it is an ideal deploy - ment platform for many automated measurements systems. adc adc ddr3 sdram memory qdr2 sram memory ddr3 sdram memory pcie bus trigger fpga dc front-end dc front-end timebase pcie switch control in 1 in 2 ref in clk in trg in trg out i/o dpu custom real-time processing adc adc adc adc figure 1. simplifed block diagram of the m9203a pxie high-speed digitizer/wideband digital receiver. block diagram on-board real-time processing at the heart of the m9203a pxie high-speed digitizer/wideband digital receiver is a data processing unit (dpu) based on the powerful xilinx virtex-6 fpga. this dpu is responsible for controlling the module functionality, data fow and real-time signal processing. this powerful feature allows data reduction and storage to be carried out at the digitizer level, minimizing transfer volumes and speeding-up analysis.
04 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet software platform keysight software suite keysight io libraries suite offers fast and easy connection to instruments and the newest version extends that capability to include modular instruments. drivers the module comes with the ividigitizer class compliant keysight md2 ivi-com and ivi-c drivers that work in the most popular development environments including visual c/c++, c#, vb.net, matlab, and labview. linux is also supported using the ivi-c driver. easy software integration to help you get started and complete complex tasks quickly, the m9203a pxie wideband digitizer is supplied with a comprehen - sive portfolio of module drivers, documentation, examples, and software tools to help you quickly develop test systems with your software platform of choice. compliance the m9203a is pxi express compliant. designed to beneft from fast data interfaces, the product can be integrated in pxie and pxi hybrid chassis slots. figure 3. m9203a front panel with analog inputs and multiple i/o signals. software applications in addition, the m9203a includes the keysight md2 soft front panel (sfp) graphical interface. this software application can be used to explore the capabilities of the keysight modular high- speed digitizers. for advanced measurement analysis, the m9203a pxie high- speed digitizer/wideband digital receiver can be combined with keysights 89600 vector signal analysis software, the industrys standard for signal analysis and demodulation. the m9203a allows fast connection to the 89600 vsa software through its high data throughput pcie backplane, compared to traditional instruments. figure 2. md2 software front panel (sfp) interface. figure 4. m9203a pxie 12-bit high-speed digitizer/wideband digital receiver offers a small size for easy integration within a pxie chassis.
05 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet firmware options the m9203a pxie high-speed digitizer/wideband digital receiver provides several frmware options: C dgt : digitizer frmware C int : interleaved channel sampling functionality C fdk 1 : custom frmware capablility C tsr 2 : triggered simultaneous acquisition and readout C ddc : wideband real-time digital down-conversion easy frmware switch a simple call to the confguration function will enable to switch to the required option. dgt digitizer frmware the digitizer frmware: C allows standard data acquisition, including: digitizer initialization, setting of the acquisition and clocking modes, management of channel triggering for best synchronization, storing data in the internal memory and/or transferring them through the backplane bus. C implements multi-record acquisition functionality. C supports fxed internal clocking frequency with internal or external reference, and variable frequency external clock. C offers programmable binary decimation to lower the sample rate by a factor of 2 n where n is defned in the range 1 to 10 for single record. e.g. you can select from 1.6 gs/s down to 1.5625 ms/s. C trigger time interpolator (tti): high precision integrated time to digital converter can be used to increase time measure - ment accuracy. int interleaved channel sampling functionality this interleave option allows two channels to be combined and to reach 3.2 gs/s in one channel acquisition mode. fdk custom frmware capability this option enables loading 4 custom frmware created with the u5340a fpga development kit 5 . 1. a calibration digitizer function is available with each frmware. 2. only available with dgt option. 3. please contact keysight to fnd out the repetition rate that can be achieved in your application. 4. on the virtex-6 lx195t dpu fpga. 5. there are 11 w maximum power dedicated to fpga processing, the custom frmware design must ft within this power provision. the triggered simultaneous acquisition and readout architecture allows to continuously acquire new records while reading previ - ous ones. tsr solution is dedicated to applications requiring no trigger loss, achieving longer recording time when compares with standard digitizer (-dgt). tsr option main features: C high trigger rate with guaranteed no lost trigger for specifc confguration 3 . C easy to use solution, implementing an optimal and automated control of memory addressing. C selecting larger memory size option allows longer record size and provides larger buffer for data transfer to host pc, especially useful for applications with non-periodic trigger or very high trigger rate during a limited period. ddc real-time digital down-conversion the real-time digital down-conversion option (-ddc), in addition to the basic digitizer functionality, implements a real-time digital decimation and fltering on the digitized data, allowing the user to tune and zoom on the signals of interest. this exclusive ip algorithm provides very powerful and fexible digital down- conversion on 2 channels. the flters and local oscillators (lo) are synchronized to maintain constant phase and timing relationships allowing phase-coherent post processing. the ddc provides three main functions: C frequency shifting (tune): independently shifting each chan - nels if signal into baseband, allows the analysis bandwidth to be set around the signal of interest. C data reduction (zoom): reducing the bandwidth and sample rate to match the analyzed signal decreases the amount of data that needs to be transferred for a given capture dura - tion, in turn accelerating post-processing operations. C magnitude trigger: setting the magnitude level that the down converted signal needs to achieve at a specifed frequency and bandwidth to generate a digital trigger on all channels. these functions allow isolation of the signal of interest from other signals in a crowded spectrum, improved dynamic range as the integrated noise is reduced, and increased snr and effective number of bits (enob). the resulting advantage for your application is a reduced test time, while improving overall test effciency. tsr triggered simultaneous acquisition and readout
06 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet firmware development u5340a - fpga development kit 1 the fpga development kit is primarily intended to open the design of the fpga to specifc user requirements by providing a development framework that interfaces to the underlying hardware. the fpga development kit combines capabilities to: C achieve multi gs/s real-time processing on a full digitizer framework by leveraging the full density and speed of the fpga. C shorten time-to-market with turn-key, easy-to-use development fow and debug. there are several rationales to consider developing custom signal processing such as: C data throughput optimization C real time processing C implementation of custom ip and oem technical know-how C re-usability and upgradability. the fpga development kit includes everything you need: source code, ready-to-use base design, a set of cores to easily interface to the underlying hardware, a test-bench environment for design and simulation, and automated building script. adc interface calibration digitizer configuration custom real-time processing ddr3 ctrl sram ctrl ddr3 ctrl pcie gen 2 system monitoring clock/reset manager fpga figure 5. enlarged block diagram of the fpga xilinx virtex-6 predefned keysight ip cores custom real-time processing (using the fpga development kit) for more information: keysight u5340a - fpga development kit for high-speed digitizers keysight product brochure 5991-2424en http://literature.cdn.keysight.com/litweb/pdf/5991-2424en.pdf 1. this standalone software package must be acquired separately.
07 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet application options 1 for specifc applications the m9203a pxie high-speed digitizer/ wideband digital receiv er can be confgured with specifc options: C cb0 : digitizer streaming and recording C cb2 : digital down converter streaming and recording at 1.6 gs/s C bb1 : high fdelity digitizer cb0 digitizer streaming and recording cb0 is a turnkey reference bundle, based on the continuous simultaneous acquisition and readout architecture, implementing a real time digitizer data recorder for gapless acquisition. it includes a command line application ensuring performance of up to 2 gb/s 2 in a specifc qualifed system. an easy to use data viewer application is also provided. this digitizer streaming and recording option with bundled appli - cations provides: C guaranteed recording specifcation C various recording speed controlled by application C adaptable sampling rate (decimation and external clock) C data throughput optimization (12-bit, 10-bit or 8-bit mode). this option is added on top of a m9203a pre-confgured version composed of: C 1.6 gs/s sampling rate (-sr2) or up to 2 gs/s (-sr2, -int, with external clock) C full bandwidth (-f10) C 4 gb acquisition memory (-m40) C digitizer frmware (-dgt) the digitizer data streamer application is an intuitive command line application which allows to control the m9203a and adapts its data rate to the target application. the data viewer is a graphical user interface (gui) application which allows to read, display, select and export the data stored. 2 g b / s s s d d a t a s t o r a ge m 9203a p x ie d i gi t i z e r c h a n n e l 2 c h a n n e l 1 u p t o 3 g b / s r e c o m m e n de d h o s t p c cb2 digital down-conversion streaming and recording this bundle enables continuous gapless acquisition, implementing: C digital down converter functionality in real time C data steaming to host C multichannel recording to disk all i/q samples for later analysis. C independent local-oscillators, with phase-coherency between channels. the -cb2 option is added on top of a m9203a pre-confgured version composed of: C 1.6 gs/s sampling rate (-sr2) C full bandwidth (-f10) C 4 gb acquisition memory (-m40) C digitizer frmware (-dgt) this option provides: C guaranteed recording specifcation up to 320 mhz instantaneous bandwidth (ibw) with tunable intermediate frequency with recommended confguration. C data throughput optimization (i/q samples with 32-bit, 16-bit or 12-bit mode). the option includes an intuitive command line application allowing to control the m9203a and a data viewer providing a simple graphical user interface (gui) which allows to read, display, select and export the data stored. maximum streaming and recording performance is guaranteed using an additional qualifed host computer system with specifc storage devices confguration. 4 bb1 high fdelity digitizer this high fdelity digitizer option provides enhanced performance by: C compensating the adc and front-end distortion C minimizing interleave spurs C reducing the overall noise bandwidth. this results in highly improved and uniform measurement fdelity across the useful bandwidth, which greatly benefts rf and wireless frequency domain measurements. the digitizers post processing compensation also delivers better spurious-free dynamic range (sfdr) and intermodulation product (imx) specifcations. this application option is pre-confgured with: C 1.6 gs/s sampling rate (-sr2) leaving choice of bandwidth and memory, for optional use in -bb1 mode, recommendation is: C 650 mhz bandwidth (-f05) C 256 mb acquisition memory (-m02) it allows the following usage as high fdelity digitizer: C 1.6 gs/s with 650 mhz bandwidth, up to 64 msamples/ch. C 800 ms/s with 400 mhz bandwidth, up to 32 msamples/ch. C 400 ms/s with 200 mhz bandwidth, up to 16 msamples/ch. C 200 ms/s with 100 mhz bandwidth, up to 8 msamples/ch. C 100 ms/s with 50 mhz bandwidth, up to 4 msamples/ch. 1. application options are delivered on the high-speed digitizer dvd. 2. equivalent to: 2 gs/s in 8-bit mode, 1.6 gs/s in 10-bit mode, and 1.3 gs/s in 12-bit mode. 3. to reach the guaranteed performances the system requires both an external computer and data storage. 4. keysight proposes full system and installation services. please contact support at digitizers@keysight.com for additional information. figure 6. streaming options (-cb0, -cb2) are proposed with a recommended host pc and ssd. performance is guaranteed with specifc confgurations 3 . maximum streaming and recording performance is guaranteed using an additional qualifed host computer system with specifc storage devices confguration. 4
08 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet technical specifcations and characteristics analog input (in1 and in2 sma connectors) number of channels 2 (without int option), 2 or 1 (with int option) impedance 50 ? 2 % coupling dc full scale ranges (fsr) 1 v and 2 v maximum input voltage 1v fsr: clamp at 3.6 v, absolute maximum dc voltage rating 4.6 v 2v fsr: clamp at 6.3 v, absolute maximum dc voltage rating 5.0 v input voltage offset C2xfsr to +2xfsr input frequency range (-3 db bandwidth) -f05, -sr2 dc to 650 mhz (nominal) in 1v fsr at 1.6 gs/s dc to 650 mhz (nominal) in 2v fsr at 1.6 gs/s -f05, -sr2, -int dc to 650 mhz (nominal) in 1v fsr at 3.2 gs/s dc to 650 mhz (nominal) in 2v fsr at 3.2 gs/s -f10, -sr2 dc to 1.9 ghz (nominal) in 1v fsr at 1.6 gs/s dc to 2.0 ghz (nominal) in 2v fsr at 1.6 gs/s -f10, -sr2, -int dc to 1.4 ghz (nominal) in 1v fsr at 3.2 gs/s dc to 1.4 ghz (nominal) in 2v fsr at 3.2 gs/s dc gain accuracy 0.5% (nominal) in 1v fsr 0.7% (nominal) in 2v fsr offset accuracy 0.5% in 1v fsr 1.5% in 2v fsr time skew 1 skew between channels 2 50 ps (nominal) channel-to-channel skew stability 3 200 fs pk (nominal) 75 fs rms (nominal) 2 bandwidth limit flters (bwl) 650 mhz (nominal) for -sr2 effective number of bits (enob) 4 -sr2 @ 410 mhz 9.1 (nominal) signal to noise ratio (snr) 4 -sr2 @ 410 mhz 57 db (nominal) spurious free dynamic range (sfdr) 4 -sr2 @ 410 mhz 64 dbc (nominal) total harmonic distortion (thd) 4 -sr2 @ 410 mhz C64 db (nominal) 1. the channel-to-channel skew is defned as the magnitude of time delay difference between two digitized channel inputs, granted the same signal is provided to each channel at the exact same time. 2. the measurement represents the maximum time skew between 2 channels of a single unit, measured with a sineft method on 100 ksamples, for a sinusoid signal at 400 mhz and averaged 10 times. 3. skew and offset stability are measured at 25 c in a climatic chamber. the skew and offset between channels are measured every 5 minutes over 12 hours and after 1 hour stabilization time and the values represent the dispersion of the measurements. 4. measured for a C1 dbfs input signal in internal clock mode with option -f10 at 1.6 gs/s (option -sr2).
09 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet technical specifcations and characteristics (continued) digital conversion resolution 12 bits acquisition memory -m02 -m10 -m40 256 mb (64 msamples/ch) 1 gb (256 msamples/ch) 4 gb (1 gsamples/ch) sample clock sources internal or external internal clock source internal, external reference real-time sampling rates -sr2 -sr2, -int 1.6 gs/s 3.2 gs/s sampling jitter 225 fs (nominal) 1 clock accuracy 15 ppm external clock source (clk in mmcx connector) impedance 50 ? frequency range 2 -sr2 1.8 ghz to 3.2 ghz signal level +5 dbm to +15 dbm , 0 v dc coupling ac external reference clock (ref in smb connector) impedance 50 ? frequency range 100 mhz 1 khz signal level C3 dbm to +3 dbm coupling ac acquisition modes (depends on frmware options) single shot, sequence 3 , continuous 1. jitter fgure based on phase noise integration from 100 hz to 1600 mhz. 2. the sampling rate corresponds to half of the external clock frequency in 2-channel mode (non interleaved channels). in interleaved mode (only available with the int option), the sampling rate corresponds to the frequency of the external clock signal. 3. up to 131072 records. record maximum length = memory size/number of channels.
10 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet 1. at 10 mhz on a 50 ? load. 2. i/0 3 reserved for future use. 3. only on i/o 1. 4. at maximum sample rate or at decimated sampling rate down to 1/16 of the highest sample rate (1/32 of the highest sample rate with interleaving). technical specifcations and characteristics (continued) trigger trigger modes positive or negative edge trigger sources external, software, channel channel trigger frequency range dc to 250 mhz external trigger (trg in smb connector) coupling dc impedance 50 ? level range 5 v minimum amplitude 0.5 v pk-pk frequency range dc to 2 ghz maximum time stamp duration -sr2 32 days trigger time interpolator resolution 4 6.25 ps trigger time interpolator precision 4 15 ps rms (nominal) rearm time (deadtime) -sr2 500 ns (nominal) trigger out (trg out smb connector) 1 1 (programmable), 50 ? source signal level 0.8 vpp 2.5 voffset into high impedance control io (i/o 1 and 2 mmcx connectors) 2 output functions acquisition active trigger is armed trigger accept resynchronization 100 mhz reference clock divided by 2 3 sampling clock divided by 32 3 low level high level fpga synchronization input/output function fpga programmable i/o
11 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet 1. samples of this product have been type tested in accordance with the keysight environmental test manual and verifed to be robust against the environ - mental stresses of storage, transportation and end-use; those stresses include but are not limited to temperature, humidity, shock, vibration, altitude and power line conditions. test methods are aligned with iec 60068-2 and levels are similar to mil-prf-28800f class 3. technical specifcations and characteristics (continued) environmental and physical 1 temperature range operating 0 to +50 c (sea-level to 10,000 feet) 2 0 to +45 c (10,000 to 15,000 feet) 2 non-operating C40 to +70 c altitude up to 15,000 feet (4572 meters) emc complies with european emc directive C iec/en 61326-1 C cispr pub 11 group 1, class a C as/nzs cispr 11 C ices/nmb-001 this ism device complies with canadian ices-001. cet appareil ism est conforme la norme nmb-001 du canada. acoustic european machinery directive acoustic noise emission lpa < 70 db operator position normal operation mode power dissipation + 3.3 v + 12 v power on pxi connector 3.2 a 3.5 a 55 w mechanical characteristics form factor 3u/2-slot pxi-express chassis slot compatibility: pxi hybrid, pxie front panel complies with ieee1101.10 certifcation size length 185 mm x width 130 mm x height 40mm weight 0.8 kg (1.76 lbs)
12 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet 1. on older pcs with minimum ram, installation can take a long time when installing the io libraries suite and the .net framework. 2. because of the installation procedure, less disk space may be required for operation than is required for installation. the amount of space listed above is required for installation. the .net framework runtime components are installed by default with most windows installations, so you may not need this amount of available disk space. technical specifcations and characteristics (continued) system requirements topic windows linux operating systems windows 10 (32-bit and 64-bit), all versions windows 8.1 (32-bit and 64-bit), all versions windows 7 sp1 (32-bit and 64-bit). note: if using high-speed digitizer applications dvd, windows 7 (64-bit) is supported. linux kernel 2.6 or higher (32 or 64-bit), debian 7.0, centos 6 processor speed 1 ghz 32-bit (x86), 1 ghz 64-bit (x64), no support for itanium 64 as per the minimum requirements of the chosen distribution available memory 1 gb minimum 1 as per the minimum requirements of the chosen distribution available disk space 2.5 gb available hard disk space, includes: 2 C 1 gb for keysight io libraries suite C 1 gb for microsoft .net framework note: 400 mb for high-speed digitizer applications. 100 mb display minimum of 1024 x 768, 96 or 120 dpi no display required browser use a supported version of internet explorer; see http://support.microsoft.com/kb/969393 distribution supplied browser defnitions for specifcations specifcations describe the warranted performance of calibrated cards that have been stored for a minimum of 2 hours within the operating temperature range of 0 to 50 c, unless otherwise stated, and after a 45 minute warm-up period. data represented in this document are specifcations unless otherwise noted. characteristics describe product performance that is useful in the application of the product, but that is not covered by the product warranty. characteristics are often referred to as typical or nominal values. C ? typical describes characteristic performance, which 80% of cards will meet when operated over a 20 to 30 c temperature range. typical performance is not warranted. C ? nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 c temperature range. nominal performance is not warranted. note: all graphs contain measured data from several units at room temperature unless otherwise noted. calibration the m9203a is factory calibrated and shipped with a certifcate of calibration.
13 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet related products model description m9018a pxie 18-slot chassis m9021a pcie cable interface m9048a pcie deskstop adapter m9036a pxie embedded controller m9037a pxie high performance embedded controller m9393a pxie performance vector signal analyzer: 50 ghz m9362ad01 pxie quad downconverter: 10 mhz to 50 ghz 89601b 89600 vsa software, transportable license u5340a fpga development kit for high-speed digitizers ordering information model description m9203a pxie 12-bit pxie high-speed digitizer/wideband digital receiver includes: -software examples and product information on cd -mmcx male to bnc male cable, 1m (qty 1) -warranty extended to 3 years confgurable options sampling rate m9203aCsr2 1.6 gs/s sampling rate (3.2 gs/s with -int option) bandwidth m9203a-f05 650 mhz bandwidth m9203a-f10 full bandwidth memory m9203a-m02 256 mb (64 ms/ch) acquisition memory m9203a-m10 1 gb (256 ms/ch) acquisition memory m9203a-m40 4 gb (1 gs/ch) acquisition memory firmware m9203a-dgt digitizer frmware m9203a-int interleaved channel sampling functionality m9203a-fdk custom frmware capability m9203a-tsr triggered simultaneous acquisition and readout m9203a-ddc wideband real-time digital down-conversion applications m9203a-cb0 digitizer streaming and recording m9203a-cb2 digital down-converter streaming at 1.6 gs/s m9203a-bb1 high fdelity digitizer these options represent the standard confguration advantage services: calibration and warranty keysight advantage services is committed to your success throughout your equipments lifetime. m9203a-a6j commercial calibration certifcate with test data included return-to-keysight warranty C 3 years r-51b-001-5z return-to-keysight warranty C 5 years confguration and ordering information software information supported operating systems and host computers windows 10, 8.1 or 7 (32-bit and 64-bit), all versions linux standard compliant drivers ivi-com, ivi-c, matlab supported application development environments (ade) visualstudio (vb.net, c#, c/c++), vee, labview, labwindows/cvi, matlab please contact keysight for other options not shown: digitizers@keysight.com model description U5300A-102 mmcx male to bnc male cable, 1 m u530 0a-112 smb female to bnc male cable, 0.1 m accessories
14 | keysight | m9203a pxie high-speed digitizer/wideband digital receiver - data sheet for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-9-7-17) dekra certified iso9001 quality management system www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2015 quality management system www.keysight.com/find/high-speed-digitizers www.keysight.com/find/m9203a mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. http://www.keysight.com/find/emt_product_registration register your products to get up-to-date product information and find warranty information. keysight services www.keysight.com/find/service keysight services can help from acquisition to renewal across your instruments lifecycle. our comprehensive service offeringsone- stop calibration, repair, asset management, technology refresh, consulting, training and morehelps you improve product quality and lower costs. keysight assurance plans www.keysight.com/find/assuranceplans up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. this information is subject to change without notice. ? keysight technologies, 2016-2018 published in usa, february 27, 2018 5992-1474en www.keysight.com evolving since 1939 our unique combination of hardware, software, services, and people can help you reach your next breakthrough. we are unlocking the future of technology. from hewlett-packard to agilent to keysight.

▲Up To Search▲

Price & Availability of U5300A-102

	To Download U5300A-102 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .